WHEEL INSTALLATION
WARNING
Improperly installed wheels can adversely affect tire wear and vehicle
handling, which can result in serious injury or death. Always ensure that all
nuts are torqued to specification. Do not service axle nuts that have a cotter pin
installed. Your dealer can assist.
1. Place the transmission in PARK.
2. Place the wheel on the hub with the valve stem toward the outside and
rotation arrows on the tire pointing toward forward rotation.
3. Attach the wheel nuts and finger-tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification.
LED LIGHTS
LIGHTS
Poor lighting can result in reduced visibility when driving. Headlight and taillight
lenses become dirty during normal operation. Clean lights frequently and
replace failed (or failing) lights promptly. Do not operate this vehicle at night or in
low light conditions until the headlight is replaced. Always make sure lights are
adjusted properly for best visibility.
The vehicle is equipped with integrated LED lights. In the event of a failure, the
entire assembly
q
must be replaced.
143
MAINTENANCE
To Next Page
Loading...
Need help?
General
