TIP
With the ignition key off, pressing the MODE button or either toggle button will
power up the Rider Information Center for 10 seconds to allow viewing of the
odometer and the clock.
INDICATOR LAMPS
INDICATOR ICON FUNCTION
Vehicle Speed
When standard mode is selected, speed
displays in miles per hour.
When metric mode is selected, speed displays
in kilometers per hour.
Check Engine
This indicator appears if a fault occurs. Do not
operate the vehicle if this warning appears.
Serious engine damage could result. Your
authorized POLARIS dealer can assist.
Check Battery
This warning usually indicates that the vehicle
is operating at an RPM too low to keep the
battery charged. It may also occur when the
engine is at idle and high electrical load (lights,
cooling fan, accessories) is applied. Drive at a
higher RPM or recharge the battery to clear the
warning.
EPS Warning (if
equipped)
This indicator illuminates briefly when the key
is turned to the ON position. If the light remains
on, the EPS system is inoperative. See your
POLARIS dealer, or other qualified person, as
soon as possible for repair. Continued
operation could result in permanent damage to
the EPS unit and increased steering effort.
Engine Hot
This lamp illuminates to indicate an overheated
engine. If the indicator flashes, the overheating
condition remains, and the system will
automatically reduce engine power.
Neutral
This lamp illuminates when the transmission is
in neutral and the ignition key is in the ON
position.
60
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
