DRIVE MODE
INDICATOR DESCRIPTION FUNCTION
2WD When the switch is on 2X4, the vehicle
is in two-wheel drive at all times.
AWD When in All-Wheel Drive, the demand
drive unit will automatically engage any
time the rear wheels lose traction. When
the rear wheels regain traction, the
demand drive unit will automatically
disengage. There is no limit to the length
of time the vehicle may remain in 4X4.
The vehicle automatically engages 4X4
when operating in reverse if the switch is
set to 4X4 position.
Turf Mode (if
equipped)
When operating in TURF mode, the
inside rear wheel will rotate
independently from the outside wheel
during turns. Operate in TURF mode
only as needed to protect smooth, level
surfaces from tire damage. DO NOT
operate in TURF mode when climbing or
descending hills, when sidehilling, or
when operating on uneven, loose, or
slippery terrain such as sand, gravel,
ice, snow, obstacles, and water
crossings. Always operate in AWD on
these types of terrain.
73
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
