28
FEATURES AND CONTROLS
Seat Belts
This POLARIS vehicle is equipped with three-point lap and diagonal
seat belts for the operator and passenger. Always make sure the seat
belts are secured for both the operator and passenger before riding.
To wear the seat belt properly, follow
this procedure:
1. Pull the seat belt latch downward
and across your chest toward the
buckle at the inner edge of the seat.
The belt should fit snugly across
your hips and diagonally across
your chest. Make sure the belt is not
twisted.
Tip: The position of the shoulder strap can
be adjusted to the height of the
operator. Have an adult relocate the
mounting bolt to a different position,
making sure the nut and bolt are
tightened securely.
2. Push the latch plate into the buckle
until it clicks.
3. Release the strap, it will self-
tighten.
4. Press the red release latch on the
buckle to release the seat belt.
To Next Page
Loading...
Need help?
General
