Polaris RZR XP 1000 EPS 2019 - SPARK PLUGS; Spark Plug Gap; Torque; Spark Plug Removal and Replacement

DEMAND DRIVE FLUID CHANGE
The demand drive drain plug
q
is located on the bottom of the gearcase.
1. Remove the fill plug.
2. Place a drain pan under the drain plug.
3. Remove the drain plug. Allow the fluid to drain completely.
4. Clean the drain plug.
5. Reinstall the drain plug. Torque to specification.
6. Add the recommended fluid to the bottom thread of the fill plug hole.
7. Reinstall the fill plug. Torque to specification.
8. Check for leaks. Discard used fluid properly.
124
MAINTENANCE