EasyManua.ls Logo

Polaris Slingshot SL 2020 - Cleaning and Storage

Polaris Slingshot SL 2020
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLEANING AND STORAGE
CLEANING PRODUCTS
This section provides tips on the very best way to clean, polish and preserve
every surface of your beautiful new SLINGSHOT vehicle. We recommend the
use of Polaris Engineered Vehicle Care cleaning and polishing products to offer
the best care for your vehicle. After cleaning the vehicle, inspect for damage to
the painted surfaces. Repair chips or scratches promptly by applying touch-up
paint to prevent corrosion.
For more information, or for answers to your cleaning and detailing questions,
please see your SLINGSHOT dealer.
WASHING THE VEHICLE
NOTICE
Do not use pressurized water to wash the SLINGSHOT vehicle. Water may
seep in and deteriorate wheel bearings, brake caliper assemblies, electrical
connectors and transmission seals. Do not direct any water stream at the air
intakes, exhaust outlets, radiator, rider compartment, engine compartment,
heat shields, or electrical components.
1. Do not use abrasive cleaners.
2. Rinse off as much dirt and debris as possible with water running at low
pressure. Use as little water as possible when washing near the air intake or
the exhaust pipe openings. Dry these components thoroughly before using
the vehicle.
3. Make sure the brakes are functioning properly before riding.
135
CLEANING AND STORAGE

Related product manuals