TRANSPORTING AND TOWING
TRANSPORTING THE SLINGSHOT
Because of the single rear wheel on the SLINGSHOT vehicle, it cannot be towed
by a conventional tow truck. Never tow the SLINGSHOT vehicle on its wheels
behind another vehicle.
To transport the SLINGSHOT vehicle, always use a trailer or flatbed truck. A
trailer must have an approved load rating greater than the actual weight of the
SLINGSHOT vehicle, including any installed accessories or cargo.
CAUTION
SLINGSHOT vehicles must be loaded with the front of the vehicle pointed
toward the direction of travel. Loading the vehicle backwards may cause
damage to the hood or other body panels during transport.
Follow these guidelines after loading the SLINGSHOT vehicle on a trailer or
flatbed truck.
1. Place the transmission in gear.
2. Engage the park brake.
3. Press the engine start/stop button to turn the engine off.
4. Secure all cargo and other items or remove them from the vehicle.
5. Secure all storage compartment doors.
6. Block all wheels at the front and rear of each tire.
7. Always secure the frame of the SLINGSHOT vehicle to the transporting unit
securely with suitable tie-down straps. Do not attach straps to the lower front
trim. Secure the tie-down straps to the lower front A-arms
q
and rear swing-
arm
w
. See illustration.
8. Never allow passengers on a trailer or in a trailered vehicle.
9. Reduce speed and drive with caution while transporting.
139
TRANSPORTING AND TOWING
To Next Page
Loading...
Need help?
General
