STOPPING THE ENGINE
(AUTODRIVE TRANSMISSION)
Bring the vehicle to a complete stop before stopping the engine.
WARNING
Stopping the engine with the transmission in Drive (D) or Reverse (R) while the
vehicle is moving could cause loss of rear wheel traction or engine and
transmission damage, which could cause loss of control and serious injury or
death. Always stop the engine after the vehicle is fully stopped. If the engine
stops unexpectedly while the vehicle is moving, guide the vehicle to a safe
location off the road and away from traffic.
IMPORTANT
To perform an emergency engine stop while the vehicle is in motion, hold the
engine start/stop button for 4 seconds.
NOTICE
If there is need to push or tow the vehicle with the engine off, brake to a
complete stop, press the Neutral (N) button, and then press the Engine Start/
Stop button.
1. Brake to a complete stop.
2. Engage the park brake.
3. Press the Engine Start/Stop button.
NOTICE
Your vehicle will stay in the gear in which it was shut down. Do not use this
feature to prevent your vehicle from moving after shutdown. Always use the
park brake to prevent vehicle movement after shutdown.
83
OPERATION
To Next Page
Loading...
Need help?
General
