REVERSE OPERATION
(AUTODRIVE TRANSMISSION)
CAUTION
The reverse speed limit feature limits reverse operation to 10 MPH (16 km/h).
Do not attempt to exceed this speed. If the engine seems to “cut out”, vehicle
speed is exceeding the limit. Reduce throttle and slow down. Exceeding the
limit could result in vehicle instability.
Follow these precautions when operating in reverse:
1. Brake to a complete stop.
2. When fully stopped, press the reverse (R) button on the center console.
3. Always check for obstacles or people behind the vehicle, and always inspect
left and right fields of vision before operating in reverse. If your vehicle is
equipped with a back-up camera, view the display screen for additional
assistance as needed while operating in reverse. See the Back-Up Camera
section for details.
4. When it’s safe to proceed, release the brake pedal and apply throttle slowly.
NOTICE
Never apply hard throttle while operating in reverse.
5. Always observe your path of travel and be alert to traffic, pedestrians and
obstacles at all sides of the vehicle while operating in reverse.
86
OPERATION
To Next Page
Loading...
Need help?
General
