ELEVATING THE VEHICLE FOR SERVICE
WARNING
Serious injury or death can occur if the vehicle moves or falls while elevated.
When elevating is necessary, make sure the vehicle is properly elevated and
stable before performing service.
Some procedures require elevating the vehicle. DO NOT attempt to elevate your
vehicle without proper equipment. If you’re not familiar with using floor jacks or
lift mechanisms, see your dealer for service.
To elevate the SLINGSHOT vehicle, use automotive-quality floor jacks. Use the
floor jacks on a firm, flat surface.
Make sure the floor jacks are positioned under the frame rails in the front where
the lower control arm mounts to the frame, or in the rear where the frame rails
meet.
For fluid changes, always make sure the elevated vehicle is level.
q
Bottom View of Lift Points
w
Side View of Lift Points
93
MAINTENANCE
To Next Page
Loading...
Need help?
General
