48
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating
condition before operating increases the risk of an accident. Always
inspect the vehicle before each use to make sure it's in safe operating
condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 33
107
Brake fluid Ensure proper level 108
Front suspension Inspect, lubricate if necessary 84
Rear suspension Inspect, lubricate if necessary 84
Steering Ensure free operation 110
Tires Inspect condition and pressure 12
111
Wheels/fasteners Inspect, ensure fastener tightness 111
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 39
87
Coolant level Ensure proper level 98
97
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 105
Indicator lights/switches Ensure proper operation 31
Air filter, pre-filter Inspect, clean 102-
103
Intake pre-filters Inspect, clean 103
Headlamps Check operation, apply POLARIS
dielectric grease when lamp is
replaced
113
Brake light/tail lamps Check operation, apply POLARIS
dielectric grease when lamp is
replaced
115
Seat Latch Push down on the seat back to
ensure the latch is secure
28
Seat Belt Check length of belt for damage,
check latches for proper operation
29
Cab Nets Check for wear or damage, ensure
proper installation
27
To Next Page
Loading...
