RECOVERY BOTTLE COOLANT
The recovery bottle fluid level can be
accesses from the front left wheel well.
1. View the fluid level in the bottle.
2. If the level is low, remove the bottle
cap and add coolant as needed.
Maintain the coolant level between
the minimum and maximum marks
on the bottle (when the fluid is cool).
3. Reinstall the cap.
4. Close and secure the front box and
cover.
RADIATOR COOLANT
To ensure that the coolant maintains its ability to protect the engine, we
recommend that the system be completely drained every five (5) years and fresh
Antifreeze 50/50 Premix added.
Any time the cooling system has been drained for maintenance or repair,
replace the coolant with fresh Antifreeze 50/50 Premix. If the recovery bottle has
run dry, check the level in the radiator. Add coolant as needed.
CAUTION
Escaping steam can cause burns. Never remove the pressure cap while the
engine is warm or hot. Always allow the engine to cool before removing the
pressure cap.
1. Access the pressure cap under the front box. See the Front Compartment
section for details.
2. Remove the pressure cap.
3. Using a funnel, slowly add coolant through the radiator filler neck.
4. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow
the recovery system to function properly. Your POLARIS dealer can provide
the correct replacement part.
5. Close and secure the front box and cover.
120
MAINTENANCE
To Next Page
Loading...
Need help?
General
