AIR FILTER
1. Remove the seat. Remove the air
box cover clips. Remove the air box
cover
q
.
2. Remove the filter.
3. Remove the fabric type pre- filter
from the main filter. Wash the pre-
filter in soapy water, then rinse and
let dry.
4. Reinstall the pre-filter over the main filter. Install a new main filter if needed.
5. Reinstall the filter into the air box.
TORQUE
Engine Intake Clamps:
35 in lbs (4 Nm)
6. Reinstall the air box cover and the seat.
FUSE REPLACEMENT
If the engine stops or will not start, or if you experience other electrical failures, a
fuse may need replacement. Locate and correct any short circuits that may have
caused the blown fuse, then replace the fuse. Spare fuses are provided in the
fuse box.
1. Open the front box cover, and remove the access panel.
2. Remove fuse box cover.
3. Remove the suspect fuse from the fuse panel. If the fuse is blown, install a
new fuse with the same amperage.
4. Secure the fuse box cover and access panel.
5. Secure the front box cover.
127
MAINTENANCE
To Next Page
Loading...
Need help?
General
