ACTIVE DESCENT CONTROL (ADC) SYSTEM
The ADC system allows
engine braking to all four
wheels when the vehicle
descends a hill or incline.
Always move the 4X4 switch to
ADC 4X4 before ascending or
descending a hill.
ENGAGING ACTIVE DESCENT CONTROL
The ADC system will automatically engage when all four of the following
conditions occur:
• The 4X4 switch must be in the ADC 4X4 position
• Vehicle speed must be 15 MPH (25 km/h) or less
• The throttle must be closed (throttle lever released)
• The transmission must be in gear (high, low or reverse)
DISENGAGING ACTIVE DESCENT CONTROL
The ADC system will automatically disengage if at least one of the following
conditions occur:
• The 4X4 switch is moved out of the ADC 4X4 position
• Vehicle speed exceeds 15 MPH (25 km/h)
• The throttle is open (throttle is applied)
• The transmission is shifted to neutral or park
51
FEATURES AND CONTROLS
To Next Page
Loading...
