EasyManuals Logo

Polaris TRAIL BLAZER 330 User Manual

Polaris TRAIL BLAZER 330
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
66
MAINTENANCE
Engine Oil
Always check and change the engine oil at the interval s outlined in the
Periodic Maintenance Chart beginning on page 60. Always change the
oil filter whenever changing oil.
Oil Recommendations
Polaris recommends the use of Polaris PS-4 PLUS Performance
Synthetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may
need to be changed more frequently if P olaris oil is not used. Always
use 2W-50 oil. F ollow the manufacturers recommendations for
ambient t emperature operation.
See page 107 for the part numbers of P olaris products.
CAUTION
Mixing brands or using a non-recommended oil may cause
serious engine damage. Always use the recommended oil.
Never substitute or mix oil brands.
Oil Check
The oil fill is located on the left side of the vehicle (1).
1. Position the machine on a level surface.
2. Start the engine and let it idle for 20-30 seconds. Stop the engine.
3. Remove the dipstick and wipe it dry with a clean cloth.
4. Screw the dipstick complet ely in.
5. Remove the dipstick and read the oil level. Maintain the oil level in
the safe operating range (2). Do not overfill.
1
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris TRAIL BLAZER 330 and is the answer not in the manual?

Polaris TRAIL BLAZER 330 Specifications

General IconGeneral
BrandPolaris
ModelTRAIL BLAZER 330
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals