EasyManua.ls Logo

Polaris TRAIL BLAZER 330 - Air Filter

Polaris TRAIL BLAZER 330
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
MAINTENANCE
Air Filter
1. Remove the seat, release the
clips, and remove the air box
cover.
2. Loosen the clamp and remove the
filter.
3. If equipped, remove the fabric
type pre-filter (1) from the main
filter (2). Wash the pre-filter in
soapy water, then rinse and let
dry. Reinstall the pre-filter over
the main filter.
4. Replace the main filter with a
new filter if needed.
5. Reinstall the filter into the air box
and tighten the clamp. Do not
over tighten the clamp, as filter
damage could occur.
2
1

Table of Contents

Related product manuals