1
2
3
73
MAINTENANCE
Throttle Cable Freeplay
Throttle cable freeplay is adjusted at t he handlebar.
1. Locate the throttle cable
adjuster on the
handlebar.
2. Squeeze the end of the
rubber boot (1) and slide
it far enough to expose
the end of the inline
cable adjuster (2).
3. Loosen the locknut (3).
4. Rotate the boot to turn
the adjuster until 1/16″
to 1/8″ (2-3 mm)
freeplay is achieved at
the thumb lever.
NOTE: While adjusting
freeplay, be sure
to flip the throttle
lever back and
forth.
5. Tighten the locknut.
6. Squeeze the end of the
rubber boot and slide it
over the cable adjuster to
its original position.
To Next Page
Loading...
