83
MAINTENANCE AND LUBRICATION
Adjustments
Wheel Removal
1. Stop the engine, place the transmission in gear and lock the
parking brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placi ng a suitable stand under the
footrest frame.
4. Remove the wheel nuts and remove the wheel.
Operating your ATV with worn tires, improperly inflated tires,
non-standard tires or improperly installed tires will affect
vehicle handling and could cause an accident resulting in
serious injury or death.
Maintain proper tire pressure as described on the decal on
your ATV and in your owner’s manual.
Always use original equipment size and type when replacing
tires.
Make sure the wheels are installed properly.
Always replace tires when the tread depth measures 1/8″
(.3 cm) or less.
WARNING
To Next Page
Loading...
Need help?
General
