pH SWITCHES
Feed Cycle Switch Switch Delay Cycle Switch Switch
#3 #4 #5 #6
4 Minutes OFF ON 2 Minutes OFF ON
8 Minutes ON ON 5 Minutes OFF OFF
16 Minutes OFF OFF 10 Minutes ON OFF
32 Minutes ON OFF 20 Minutes ON ON
C. Erosion Feeder on a Spa or Small Body of Water is
Causing Spiking
If you are using the controller with an erosion feeder system,
which continues to dissolve sanitizer while in the off mode, it is
better to have a very short feed cycle followed by a delay that
allows the sanitizer to circulate past the sensors. This is espe-
cially important in spas or small bodies of water.
1. Timed Feed Mode = ORP Switch #10 is OFF
2. Feed Cycle in Seconds = ORP Switch #8 is OFF
3. Spa Mode = ORP Switch #7 is ON
4. Choose your desired feed and delay cycle times from the fol-
lowing options.
Recommended Settings
ORP SWITCHES ONLY
Feed Cycle Switch Switch Delay Cycle Switch Switch
#3 #4 #5 #6
9.6 Seconds ON ON 5 Minutes ON ON
Optional Settings
ORP SWITCHES ONLY
Pool Mode (#7 OFF) Spa Mode (#7 ON)
Feed Cycle Switch Switch Feed Cycle Switch Switch
#3 #4 #3 #4
4.8 Seconds ON OFF .6 Seconds OFF OFF
7.2 Seconds OFF OFF 1.2 Seconds ON OFF
9.6 Seconds ON ON 2.4 Seconds OFF ON
14 Seconds OFF ON 3.6 Seconds ON ON
27
To Next Page
Loading...
Need help?
General
