You can select the menu headings with Up/
Down movement buttons to make settings.
6.3.6.1-Language Settings
You can select subtitle and sound language
provided that the broadcast is supported for
alldigitalbroadcastingchannels.Unlessyou
make any selection, the language supported
by the broadcaster will be selected
automatically.
To perform language selection,
select Subtitling Language 1,
Subtitling Language 2, Audio
Language 1, Audio Language 2
tab from the Language Settings
menu by using Up/Down
movement buttons and make your
language selection with Left/Right
movement buttons. You can also
select subtitles directly by SUBT
button on your remote control or
make sound selection by AUDIO
button.
6.3.6.2-Access Control
With this feature you can preclude channels
that are not appropriate for children and
set age restriction for programs being
broadcasted.
Lock/UnlockChannels:Select Lock/
UnlockChannels tabs from Access
6.3.6-Digital Features
To enter digital features menu,
select FEATURES tab from the
main menu by using Up/Down
movement buttons. Select DIGITAL
FEATURES tab from FEATURES
menu by using Up/Down
movement buttons and press OK button to
confirm. DIGITAL FEATURES menu will be
displayed.
Digital Features
Language Settings
Access Control
User Interface Options
Timers
Favourite List
No Common Interface Module Present
System Menu
Select
Back
Access Control
Lock/Unlock Channels
Change PIN
Select
Back
Control menu and press OK button to confirm.
All TV Channels list will be displayed; select
the channel you want to preclude with Up/
Down movement buttons and press OK
button to confirm. x mark will be displayed
at the beginning of the channel name and
thus channel is precluded. To remove such
preclusion, repeat the same steps. Select the
channel to access the precluded channel and
enter the correct password into the displayed
password screen. The channel will not be
displayed unless the correct password is
entered.
Note 1: To re-prevent access after entering the
correct password and displaying the precluded
channel, your television has to be switched to
Standby mode and turned on again.
Note 2: The password for both of these
features has been set as 0000 at the factory.
You can change the password as you wish
under Change PIN item in the Access
Control menu.
6.3.6.3-User Interface Options
From this menu, you can decide whether to
display the scrambled channels in the program
table or not. If List Scrambled Channels
is set to ON, all channels will be displayed, if
it is set to OFF, scrambled channels will not
be displayed and if it is set to AUTO and a
CI card is installed to your television, then the
scrambled channels supported by the card will
be displayed.
6.3.6.4-Timers
In this menu you can view Reminders you had
entered from the EPG or change or delete the
entered Reminders.
6.3.6.5-Favourite Lists
Please see 6.3.3.2-Creating favorite channel list
for detailed explanation of this feature.