Polaroid 37" User Guide

I 21
EN
Enter the program number you desire or
the external source with the AV button into
SOURCE tab to specify the channel or
source from which you would like the TV to
be turned-on to. At the end of the time you
specified, your television will automatically
switch to stand-by. If the on time for TV is
specified in the Menu, the TV will switch
to the selected program or to the external
source at that time; if the TV is in standby
mode, then it will be turned on with the
selected channel or external source.
7.3.2-ChildLock
If this feature is turned On, the program
currently being watched becomes locked,
the image and sound goes off and the
locked symbol appears on the upper left
corner of the screen. The locked channel is
skipped when you channel search with PR+,
PR- buttons.
Note: Child lock feature is for Analog mode
only. Child lock tab does not appear in the
menu in Digital mode.
7.3.3-Active Antenna
When this feature is set to On, you can feed
an external antenna you will connect to your
television by the tuner of your television
without needing any external source.
7.3.4-Auto Scart
When this feature is set to On and when you
operate an external device that is connected
to your LCD television via scart, TV will
automatically switch to AV mode where
the device is connected. When it is set to
Off, your TV does not switch to the external
device automatically.
7.4-Other Picture Features
7.4.1-Zoom
Press the ZOOM button on your
remote control while watching a
channel to activate this feature.
Duringthezoomingprocess,the
imageiszoomedininthreestages
oriented to the centre. To move the
picture in this mode, you can use
Up/Down or Right/Left movement
buttons on your remote control.
Note: Zoom mode does not
functionwithCOMP/HDMI/PC
inputs. Zoom mode is aborted when
the channel is changed or Teletext
is activated.
7.4.2-Freeze (Freeze picture)
Youmayfreezetheprogrampicture
you are watching with this feature.
For this, press the FREEZE button
on your remote control. The program picture
willfreezeuntilthesamebuttonispresseda
second time.
7.4.3-Using PIP Feature (Picture in
Picture) (*)
Press the PIP button on your remote control.
PIP screen is displayed. Depending on the
selected source, a window will be opened
in the main picture and a sub screen will be
displayed. You can switch to PAP mode
by pressing the PIP button again. You can
return to the TV mode by pressing the PIP
button when you are in the PAP (Picture and
Picture) mode. You can use Right/Left
buttons to change the source in the PIP
screen when you are in the PIP or PAP
mode. You can use Up/Down buttons to
change the channels.
Note 1: Two different channels from the
Tuner can not be viewed in the PIP screen.
Only the broadcast from the external source
can be viewed in the PIP screen.
Note 2: Since the external sources such as
satellite receivers focus on single channel
and transmit it to the TV although they can
receive many channels, other channels that
are received by similar devices can not be
displayed on the POP screen.

Polaroid 37" Specifications

General

Brand	Polaroid
Model	37"
Category	LCD TV
Language	English