connection
Side view of TV
DVD
SATALLITE RECEIVER
GAME CONSOLE
HDMI: When a connection is made via HDMI socket, select the HDMI input you
connected through from the Source menu and press the OK button to be able to
display these pictures. Your TV will switch to the selected source.
Connect to the HDMI input at the back of your TV by using the connector located on
your PC or your digital video-transmission device with a suitable cable (not supplied
with the TV).
Note: To be able to watch an image in the HDMI mode, your computer must be
equipped with a HDMI graphic card.
You may display the resolution information by pressing the INFO button.
9.6.1-HDCP
Your TV supports HDCP feature. To use this feature, you must set up a
connection to your TV set’s HDMI video port and select HDMI by pressing
the AV key on your remote control.
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI
converter cable from a PC is used. Only 16:9, 4:3, 14:9 (some definitions) are
Picture connection
Sound connection
YPBPR
(Component Input): When a connection is made via
YPBPR socket, select YPBPR option from the Source
menu and press the OK button to display the picture. Your
TV will switch to the selected source.
9.6-Connecting an external equipment via HDMI
supported as picture
format.
High
To Next Page
Loading...
Need help?
General