8
Install the Batteries
If the remote control fails to operate the TV functions, replace the batteries in the
remote control.
1.Open the battery compartment cover on the back side.
,QVHUWWZR9$$$VL]HEDWWHULHVLQFRUUHFWSRODULW\
Don´t mix old or usedbatteries with new ones.
3.Closed the cover.
Initial Setup
1. Connecting your TV on the poweroutlet;
2. Press the POWER button on the remote to turn on the TV in green for the LED light.
CAUTION:Always disconnect the TV from the power outlet when the TV will
not be used for a long period of time. The POWER button on the front panel is only
used for switching the TV into standby, it does not disconnect the device from the
main voltage. To completely disconnect the main voltage, please remove the power
plug from the socket.
3UHVVWKHNH\źŸŻŹDQGIROORZLQJWKHSLFWXUHDVEHOORZWRRSHUDWHWKHVXEMHFW
NOTE:
The picture is for reference only.
23. VUDU: Press this button to select VUDU application.
24.
pandora: Press this button to select pandora application.
25.
CC: Press this button to adjust CC mode.
To Next Page
Loading...
Need help?
General