• Drive Mode
The camera has two modes for taking pictures and video clips.
Still Image Mode
Video Mode
You may switch between these two modes according to the following
steps.
1. Set the camera to Capture mode
.
2. Press the button.
3. Press the or button to select
(DRIVE
MODE).
D
STILL
VIDEO
DRIVE MODE
4. Press the button.
5. Press the or button to select the desired drive mode.
6. Press the button.
NOTE:
• Still Image mode is the default capture mode.
• This setting is also available in Video mode.
To Next Page
Loading...
Need help?
General
