Once the images or video clips are protected, an
icon will appear on
the LCD screen, indicating it is locked when you review it.
NOTE:
To protect one picture or video clip or to remove protection from one picture
or video clip, use the or button to choose the selection you want to
protect or unprotect before the above operation.
• Deleting Picture(s) or Video Clip(s)
1. Set the camera to Playback mode.
2. Press the button.
3. Press the or button to select
(ERASE).
4. Press the button.
ERASE
ERASE THIS
ERASE ALL
5. Press the or button to select the desired
setting.
6. Press the button.
7. Press the or button to select the desired
setting.
8. Press the button.
You can cancel the deletion by choosing “NO”.
ERASE THIS ?
NO
YES
OK: SET
NOTE:
• To delete one picture or video clip, use the or button to select the
one you want to delete before the above operation.
• Protected le can not be deleted. Remove protection before deleting.
• All deleted pictures and video clips can not be recovered.
To Next Page
Loading...
Need help?
General
