• Resetting to Default Settings
You can easily change all the settings you made back to the camera
default settings by the following steps.
Please refer to “Camera Default Settings” on page 76 for more details.
1. Set the camera to Still Image mode.
2. Access the Setup menu.
3. Press the or button to select
“DEFAULT”.
4. Press the button.
SETUP
FREQUENCY
LANGUAGE
DATE STAMP
TWAIN DRIVER
DEFAULT
: SET
SETUP
5. Press the or button to select the desired
setting.
6. Press the button.
DEFAULT SETTING?
NO
YES
OK : SET
To Next Page
Loading...
Need help?
General
