12 | EN EN | 13
Using Your
Polaroid Cube
+
™
Camera
On
Hold the multifunction button until the LED
turns green and you hear 3 beeps. All set!
Off
Hold multifunction button until the LED turns
off and you hear 1 long beep followed by
1 short beep.
SD Card
A microSD card must be present for your
Polaroid Cube
+
to work. To insert a microSD
card, lift the rear door and with the metal
contacts facing up, insert the card and gently
push in until you hear a click. To remove a card,
gently push the card in, release and the card
will slide back out.
If no microSD card is present, your camera
will beep continuously and the LED will blink
orange until a new microSD card is inserted.
When your microSD memory is almost
full (1GB remaining), the LED will blink
alternating orange and red. Once the SD card
is completely full you’ll hear a single short
beep and you will no longer be able to take
photos or videos. The LED will blink orange
and red until the microSD card is removed
or data is transferred from the camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
