Polaroid DMC - Camera Switches and Connectors

8
c SCSI cable (2 meter) and 25/50 DB to HD SCSI adapter:
Connect the DMC camera to a PowerMac/PowerPC
computer or the PC SCSI-2 adapter.
d Software diskettes: TWAIN driver (for Windows 95 and
Windows NT only), DMC Plug-in software for
PowerMac/PowerPC systems, and Polaroid DMC Direct
camera utility software for Windows 95, Windows NT, and
PowerMac/ PowerPC systems.
The package also contains this users guide, not shown in the
illustration.
WARNING: NOTHING INSIDE THE DMC CAMERA IS
USER-SERVICEABLE. TO AVOID THE POSSIBILITY OF
DAMAGING THE CAMERA OR VOIDING THE
WARRANTY, DO NOT DISASSEMBLE THE CAMERA.
Camera switches and connectors
Camdetl.ai
a SCSI ID selector: Sets the SCSI address of the camera (see
page 10).
b SCSI connector: Connects to the computer SCSI port via the
SCSI cable provided.
c Termination selector: Turns camera SCSI termination on or
off (normally set to On as shown).