Using the DMC camera 25
Using the DMC camera
Typical DMC workflow
To help you immediately begin using the DMC camera, a
typical workflow sequence is presented below. (After you
become familiar with DMC operation and features, you can
use the camera in the way that best suits your imaging
needs.)
1 Start your imaging application or DMC Direct.
2 If you are using an imaging application, use the Acquire or
Import command to launch the DMC interface.
3 View the subject through the microscope eyepiece, and focus
and position it as desired.
4 In the DMC window on your computer display, fine-tune
subject focus and select shutter and film speed, color
temperature and other options.
5 If necessary, click the Capture and Enhance button and
adjust color balance, contrast, brightness or sharpening.
To Next Page
Loading...
Need help?
General
