Polaroid i1037 User Guide

29
Polaroid i1037 Digital Camera User Guide
www.polaroid.com
• Using Flash
When taking pictures in difficult lighting conditions, use the Flash button to
get correct exposure. This function cannot be activated in recording movies
or continuous shooting.
SET
DISP
Flash button
To activate Flash
• Press the Flash/Right button on your
camera repeatedly until your desired flash
mode is displayed on the LCD display.
Your camera is equipped with five flash modes:
Auto. The flash fires automatically
whenever extra lighting is needed.
Red-eye reduction. The flash fires
twice to reduce the red-eye effect.
Forced on. The flash fires whenever
you press the shutter button regardless
of lighting conditions.
307307
10M
Auto flash is enabled.
Slow sync. The flash fires with a slow shutter speed.
Forced off. The flash is turned off.
NOTE:
• Flash function is only available in shooting still images but not available in Burst
and AEB modes.
• Do not charge the flash while pressing the zoom button. Charge the flash after
releasing the zoom button if necessary.

Polaroid i1037 Specifications

General

Megapixel	10 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Supported aspect ratios	16:9
Maximum image resolution	- pixels
Digital zoom	4 x
Optical zoom	3 x
Focal length range	6.3 - 18.9 mm
Digital SLR	No
Aperture range (F-F)	3.1 - 5.6
Compatible operating systems	Windows Mac
Internal memory	16 MB
Compatible memory cards	sd, sdhc
Video formats supported	AVI
Display diagonal	2.7 \
USB version	2.0
Product color	Black
Battery type	AA
Number of batteries supported	2
Flash modes	auto, fill-in, Flash off, Red-eye reduction
Scene modes	Self-portrait
White balance	Auto
Camera playback	movie, single image

Weight and Dimensions

Width	- mm