Using Blink Detection Mode
The Blink Detection mode tracks faces and determines when a captured
image has subjects with closed eyes. After shooting, when the camera
detects that the subject has blinked, a menu selection appears to ask the
user whether to save the image or not. This feature saves time in managing
photos to be stored or deleted.
To activate Blink Detection
1. Select from the Scene Mode submenu.
307307
12M
Detected faces
are framed.
Face tracking is
automatically
enabled.
2. Press the shutter button halfway down to
allow the camera to focus on the subject. The
frame turns green to indicate focus is set.
Save image
Cancel
3. Press the shutter button to capture the
image. The image is automatically saved
unless the camera detects that the subject
has blinked. In this case, the screen on the
right is displayed.
4. Select Save Image to save or Cancel to discard.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
