Auto ash
The ash res automatically as needed. Use this
setting to take most pictures.
Red-eye Reduction
The ash res a few times before taking your picture
to reduce the red-eye phenomenon.
Always On
The ash res for every picture. Use this setting in
high-contrast situations to provide ll-light or use it
indoors in low light.
S
Slow sync
The ash res regardless of the surrounding
brightness. In low light conditions, slow shutter
speed provides better lighting of the background that
is out of range of the ash.
Off
The ash does not re. Use this setting for outdoor
pictures or where ash is prohibited or may be
distracting. Also use when shooting toward a
reective surface, such as a window or mirror. If you
do not have enough light when using this setting,
your pictures will be too dark.
NOTE:
• Flash modes are only used in still image shooting.
• Never touch or block the ash with your ngers.
To Next Page
Loading...
Need help?
General
