82
6.5.13 Start Logo
This function sets up the LCD screen when the Digital Video
Camera is turned on.
1. Power [On] the Digital Video Camera and enter the [Menu] page
by touching [Menu] icon when the Digital Video Camera is at the
shooting interface.
2. Touch the screen to select “Setting”.
3. Touch the screen to select the [Start Logo] item.
4. Touch the screen to select [User setting] Then, you can select a
photo as the Start Logo.
5. Turn off then turn on the machine, Digital Video Camera will use
the photo you set up as the Start Logo.
6. If you want to cancel the Start Logo you have set up, then select
[Default Setting] after you entered the Start Logo selection, the
original Start Logo will be restored.
To Next Page
Loading...
