The Photo Capture Mode allows you to capture photos with your digital camera.
When the camera is first powered ON, the camera will be in Photo Capture Mode by default.
1. Selecting the Scene with the LCD Display:
While in Photo Capture Mode, use the LCD display to direct the camera at the scene you
would like to capture.
Note:
- Make sure the MACRO mode is set to your desired mode: Standard photo capture
using MACRO OFF, or close up photo capture using MACRO ON .
- The time available amount of photos that can be captured (as per the installed memory
card size and selected resolution) is shown on the top right of the LCD screen.
2. Changing Resolution:
If you would like to change the resolution, press the MENU button and then press the
DOWN or UP button to select ‘Resolution’. Next, press the OK/SHUTTER button to
view the Resolution options. Press the DOWN or UP button to select an option and
then press the OK/SHUTTER button to confirm the option.
The Resolution options include:
18M (4896x3672)
16M (4608x3456)
12M (4000x3000)
10M (3648x2736)
8M (3264x2488)
5M (2592x1944)
2M (1920x1080)
VGA (640x480)
To Next Page
Loading...
Need help?
General
