volume.
Press the Shutter button
to save the volume
setting.
Power Frequency
The options in the ‘Power Frequency’ menu
represent the frequency of the electrical
current in fluorescent lighting sources in your
locale. If your camera is set to a frequency
that does not match your country’s electric
current, you may see waves on the images
taken by your camera.
The Power Frequency
menu displays the following
setting options:
50HZ – UK, Europe and
Australia
60HZ – US, Canada and
South America
You can select the format for your recorded
videos by selecting the desired setting from
the Video Format menu.
Displays the Video Format
setting options.
You can select the media format for your
recorded videos by selecting the desired
setting from the Media Format menu.
Displays the Media Format
setting options.
You can use the ‘Power Save’ feature in order
to conserve your camera’s battery life. The
designated time represents when your
camera will automatically power off.
When the camera sits idle for the designated
period of time, the camera will shut off
completely and will need to be powered on
again with the power button before the next
use.
1 min.
3 min. (Default)
5min.
OFF - The camera remains
on until you power it off.
1min - The camera powers
off after 1 minute of sitting
idle.
3min - The camera powers
off after 3 minutes of sitting
idle.
5min - The camera powers
off after 5 minutes of sitting
idle.
Date & Time
The ‘Date & Time’ menu allows you to set
your camera’s date and time. This date and
time will appear on the captured images when
the Date Stamp is set to be active (ON).
To set the Year/Month/Day
and Hour: Minutes:
Press the DOWN/UP
button to change each
setting and specify the
date and time. The
selected setting goes
down in the numbers each
time you press the DOWN
button or up in numbers
when the UP button is
pressed.
Short press the
To Next Page
Loading...
Need help?
General
