11
n EN61000-3-3:2008
n EN55024:2010
n IEC61000-4-2:2008
n IEC61000-4-3:2010
n IEC61000-4-4:2012
n IEC61000-4-5:2005
n IEC61000-4-6:2008
n IEC61000-4-8:2009
n IEC61000-4-11:2004
n EN300328,EN301489-1,EN301489-17(ETSI300328,ETSI301
489)Electro-magneticCompatibilityandRadioSpectrumMatter.
n EN60950(IEC60950)I.T.E.ProductSafety
CanadianNotice
ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradionoise
emissions from digital apparatus as set out in the radio interference
regulationsoftheCanadianDepartmentofCommunications.
Lepresentappareilnumeriquenemetpasdebruitsradioelectriques
depassantleslimitesapplicablesauxappareilsnumeriquesdeClasseB
prescritesdanslereglementsurlebrouillageradioelectriqueedictepar
leMinisteredesCommunicationsduCanada.
AttachmentLimitationsStatement
Thisequipmentmeetstelecommunicationsnetwork
protective,operationalandsafetyrequirementsasprescribedinthe
appropriateTerminalEquipmentTechnicalRequirementsdocument(s).
This is confirmed by marking the equipment with the Industry Canada
certification number. The Department does not guarantee the
equipmentwilloperatetotheuser'ssatisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunicationscompany.
The equipment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a