19
Attaching the Battery Pack
Refer to the following steps for attaching the Battery Pack:
1. With one hand on the DVD Player to prevent it from moving, take the battery and
align the plastic tabs on the battery pack with holes on the player, and push the
battery pack into the DVD Player.
2. Slide the Battery Pack until you hear it click and lock into place.
Charging the Battery Pack
The battery pack must be attached to the DVD player to charge it by using the supplied
AC Power Adapter.
1. Attach the battery pack to the DVD player.
2. Plug the supplied AC Power Adapter into the player’s power jack marked with “DC
9.5/12V IN”, which is located on right side of the DVD Player.
3. Plug the other end of the AC Power Adapter Cord into a household AC Outlet as
shown below:
Rechargeable Battery
To Next Page
Loading...
