31
PREFERENCE
System Setup
1.TV DISPLAY
This item is used to set TV display mode.
Press the or button to highlight this item.
Press the button to access.
It includes 4:3 PS, 4:3 LB and 16:9.
Press the or button to choose the proper
one.
Press the ENTER/ENT button to confirm your
selection.
Press the button to exit this item.
Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is
connected.
Select 16:9 when a 16:9 wide screen TV is
connected.
2. Angle Mark
This item is used to set the Angle Mark on or off.
Press the or button to highlight this item.
Press the button to access.
Press the or button to select ON or OFF.
Press the ENTER/ENT button to confirm your
selection.
Press the button to exit this item.
Note: This function is effective only if alternative
viewing angles are available on the disc.
3. RESUME
This item is used to set last memory state.
Press the or button to highlight this item.
Press the button to access.
Press the or button to choose ON or OFF.
Press the ENTER/ENT button to confirm your
selection.
Press the button to exit this item.
To Next Page
Loading...
