GETTING STARTED
Navigating the Menu
The unit must be turned on before all operations are attempted.
1. To enter menu, press and hold OK / MENU for two (2) seconds.
2. Repeatedly press or to navigate menu. The menu will scroll in the following order:
CONF / DICT (Rec. Cond.) -> VAR -> PL ONE / ALL -> Beep -> Light -> Date -> Time
3. Press VOL+ or VOL- to turn ON / OFF a function or choose desired setup.
4. Press OK / MENU to confirm and proceed to next menu.
5. Press or to go to next or previous menu.
6. Press STOP
to exit menu.
Recording Condition
CONF (conference) is used in more open areas where the
recording source is far from the recorder. DICT (dictation) is used is
a more closed setting when the recording source is close to the
recorder.
1. Press and hold OK / MENU for two (2) seconds to enter
menu.
2. Repeatedly press or until “CONF” or “DICT” displays
and flashes (if CONF is previously selected, “CONF” will be
displayed. If DICT is previously selected, “DICT” will be
displayed).
3. Press VOL + or VOL - to choose desired recording condition.
4. Press OK / MENU button to confirm and go to next menu.
5. Press
or to go to next or previous menu or press STOP
to exit menu.
To Next Page
Loading...
Need help?
General