28
TIPS FOR THE FRAME
Power button
• Press the power button on your frame to put it into screen
sleep mode. Tap anywhere on the screen to turn the screen
back on.
• Press and hold the power button to turn the frame o. Press
the power button to turn it back on.
Deleting photos from your frame
From the main menu, select Album, scroll though the album to
find the photo you would like to delete and select the photo.
When the photo is shown in full screen, touch the screen to see
a trash can icon in the upper right corner. To delete the photo,
select the trash can icon and then select OK to confirm delete.
Forget Wi-Fi networks
You can forget networks you have previously connected. From
the main menu, select Wi-Fi, select the name of the network you
would like the frame to forget and select Forget.
Choose memory source for photos
If an external memory card and/or USB flash drive is connected
to the frame, the frame will automatically display photos from all
memory sources connected. This includes the internal memory,
USB flash drive, and memory card. You may choose to limit the
photos shown on the frame by the memory source. From the
main menu, select Album and at the top of the screen you will
see the current source of the photos (Internal Memory, USB, SD
Card, or ALL). Select the memory source shown at the
top center of the album screen and choose the memory source
from which you want the frame to display photos (Internal
Memory, USB, SD Card, or ALL). If no external memory is
connected to the frame you will see an on-screen error message
if you try to select USB or SD card.
To Next Page
Loading...
Need help?
General
