9
SETUP AND INSTALLATION
STEP 1: Wi-Fi Setup
Setup the Wi-Fi Picture Frame and connect to a
Wi-Fi network
1. Locate the picture frame as close to the Wi-Fi router
as possible, preferably within 10 feet.
2. Connect the picture frame to the included wall power
adapter and plug the adapter into the wall (the unit will
automatically turn on).
NOTE: When the frame powers on the Polaroid logo will flash
twice on the screen while system initializes.
3. Touch “Start” to advance to the home screen/main menu.
NOTE: If the frame changes to the slide show, tap anywhere
on the screen to return to the home page.
To Next Page
Loading...
Need help?
General
