Getting Started
Charging the Case
Insert the small connector of the supplied charging cable into the charging port on
the back of the case. Insert the large connector into a USB power source such as
the USB port on a computer, or into a 5V USB adapter (not included) and plug into
a wall socket.
The case charging LED indicator will flash RED while charging, and will turn solid
RED when fully charged.
Charging the Earbuds
Use the included charging case to protect and
charge the earbuds as described below.
1. Make sure that the case is fully charged.
2. Open the cover of the charging case and
place the earbuds into the correct charging
ports. They should easily “clip” into place
and feel secure.
3. If the earbuds do not automatically begin
charging when placed into the case, press
the [Charging Power] Button on the case to
begin charging.
4. The earbuds’ LED indicators will turn RED
while charging and turn BLUE when fully
charged.
Note: A tone will be heard when the earbuds are low on battery. Please recharge
when this happens.
To Next Page
Loading...
