5 Recording Photos, Videos and Voices
• Taking Photos section
Now that you are familiar with your camera, you are now ready to take
your photos.
Taking photos with your camera is very simple.
1. Turn on the camera by pressing the
Power button.
2. Frame your shot using the focus bracket
on the LCD display. See illustration on
the right.
307307
AUTO
0.0EV0.0EV
12M
3. Press the shutter button halfway down.
The camera automatically adjusts the
focus and exposure. When the camera
is ready to take the photo, the frame
bracket turns green, the shutter speed
and aperture value are displayed.
(When the focus frame turns red and the operation
LED blinks,the subject is not in focus. Release the
shutter button, recompose thescene and press the
shutter button halfway to reset the focus.)
4. Continue to press the Shutter button to capture your image.
When the shake warning icon appears, hold the camera steadily, with
your arms at your side or use a tripod to stabilize the camera to prevent
blurred images.
NOTE:
Use of the flash in the Always ON mode is recommended as well.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
