EN-37
Canceling the Protection
To cancel protection for only one image, display the image that you want to remove
the image protection.
1. Select [Protect] with the / buttons from the playback menu, and press the
SET button.
2. Select [Single] or [All] with the / buttons, and press the SET button.
3. Select [Cancel Protect] with the / buttons, and press the SET button.
J The removal of image protection is executed and the camera returns to the
playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the / buttons from the playback menu, and press the
SET button.
2. Select [Select] with the / buttons, and press the SET button.
J The images are displayed in the thumbnail display.
3. Select the image you want to protect with the / / / buttons, and press the
button.
J The protect icon [ ] is displayed with protected images. Selecting a protected
image and pressing the button again will cancel the protection. This procedure
is repeated to select multiple images.
4. Press the SET button.
J Protection and cancellation the protection are executed and the camera returns
to playback mode.
J Formatting an SD memory card overrides protection, and erases all
images regardless of their protected status.
To Next Page
Loading...
Need help?
General
