EN-45
Capture Menu (Function)
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the
[Function] menu with the button.
J [Function] menu is displayed.
3. Select the desired [Function] option item with
the / buttons, and press the SET button
to enter its respective menu.
4. Select the desired setting with the /
buttons, and press the SET button.
5. To exit from the menu, press the MENU
button.
Capture Mode
This sets the recording method at the time of capturing images.
*[Blank] Single: Captures an image at a time.
*[ ] Continuous: Permits continuous photography of 3 images max.
*[AEB] AEB: Permits 3 consecutive images in the order of standard
exposure, underexposure and overexposure compensation.
J In [Continuous] and [AEB] capture mode, the voice memo is
automatically fixed at [Off].
Voice Memo
Refer to section in this manual titled “Recording Voice Memos” for further details.
* On / Off
LCD Bright.
Select a brightness level for the LCD monitor.
The LCD becomes brighter with the button
and darker with the button. The adjustment
range is from -5 to +5.
Capture
SET:Adj.MENU:Exit
J When [Voice Memo] is set to [On], the preview setting is also fixed at
[On].
Capture
LCD Bright.
SET:Enter
MENU:Exit
To Next Page
Loading...
Need help?
General
