EN-51
Play
SET:Adj.
MENU:Exit
Setup Menu (In Playback Mode)
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the
[Setup] menu with the button.
J [Setup] menu is displayed.
3. Select the desired [Setup] option item with
the / buttons, and press the SET button
to enter its respective menu.
4. Select the desired setting with the /
buttons, and press the SET button.
5. To exit from the menu, press the MENU
button.
Beep
Refer to section in this manual titled “Beep” in Setup Menu (In Photography Mode) for
further details.
Format
Refer to section in this manual titled “Formatting the SD Memory Card or Internal
Memory” for further details.
Fr. No. Reset
Refer to section in this manual titled “Fr. No. Reset” in Setup Menu (In Photography
Mode) for further details.
Card Info.
This displays the free capacity of the SD memory card.
System Info.
This displays the firmware version of the camera.
Language
Refer to section in this manual titled “Language” in Setup Menu (In Photography
Mode) for further details.
Video Output
This sets video output system of the video equipment that you are going to connect
to the camera.
* NTSC / PAL
To Next Page
Loading...
Need help?
General
