EN-39
9. Select date to [On] or [Off] with the / buttons, and press the SET button.
J [On]: The date of the image will also be printed.
J [Off]: The date of the image will not be printed.
10.Select [Print Enable] with the / buttons, and press the SET button.
11.Select [Execute] with the / buttons, and press the SET button.
J This creates a file containing the DPOF information, and when the operation is
finished, the screen returns to the playback mode.
J The DPOF icon [ ] is displayed on each
image that has set up DPOF settings.
J The date that is printed on the image is the date set on the camera. To print
the correct date on the image, set the date on the camera before you
capture the image. Refer to section in this manual titled “Setting the Date
and Time” for further details.
To Next Page
Loading...
Need help?
General
