5
POLAROID XS100 USER GUIDE
A new MicroSD card should be formatted before using. For instructions on how to format
the card, refer to the Section "Connecting the Camera to a Computer/TV/HDTV."
Setting Date Time
You can set the camera's clock activating the XS100’s software which resides in the
camera’s internal memory.
To set up the camera clock
1. Insert a MicroSD card with at least 2MB
free space into the camera.
2. Connect the camera to a PC via the USB to
mini USB cable.
3. Press the Power Button 0 to turn the
camera ON.
4. Using the computer’s file manager, open
the MicroSD card folder and find the file
"Polaroid.exe." Double click the file to open
it. Mac users note: Visit polaroidaction.com
to download the Mac version of the XS100
software.
5. Find the "Date and Time" and click "SET."
6. Enter the date and time manually or click
"Sync with PC" to set with your PC clock
(Check that your PC time and date are
accurate.).
7. Click "Ok" to save the settings.
Attaching The Camera Panel Cover
The waterproof housing allows the camera to operate
as deep as 30 feet under water. In order to protect the
camera when using it in wet conditions, you must seal
the camera’s operation panel with the Panel Cover .
1. Attach the Panel Cover (Figure 1) to the back of
the camera by positioning the Panel Cover Lock in
the 12 o’clock position and rotate the outer ring of
the Panel Cover clockwise (in the direction of arrow
No.1) until the two black circles are lined up (Figure
2).
2. Using a fingernail, slide the Panel Cover Lock
To Next Page
Loading...
Need help?
General
Weight and Dimensions
