EasyManuals Logo

Polaroid XS100 User Manual

Polaroid XS100
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
POLAROID XS100 USER GUIDE
Method 1: Whether the camera power is ON or OFF, simply slide the Recording Slide
Switchfrom STOP to REC to start recording.
Method 2: When your camera is OFF and the Recording Slide Switch is at the REC
location, press and hold the Power Button to turn the camera ON, and it will start
recording.
To stop recording, move the Recording Slide Switch from REC to STOP. The camera
will vibrate and the LED Indicator will illuminate GREEN to indicate the recording has
stopped. The camera will then enter the Standby mode. An additional option is to hold the
Power Button to stop the recording and turn the camera off. The camera will vibrate two
seconds, and the Red LED light will turn off.
*A smaller video file of 432x240 (w/1080p/720p) or 320x240 (w/960p) will be created
simultaneously when recording an HD/FHD video file. The smaller video file size allows for
more efficient uploading of content to social media sites and email.
*Changing video resolution is disabled during video recording.
*Check that the MicroSD card has sufficient space to capture your video. The card is full
when the camera vibrates for 5-seconds, and the Green LED
flashes continuously.
Taking Photos
The XS100 camera allows you to take 16MP, 5MP, 3MP, VGA high-quality still images.
To capture a still image
1. Turn on the camera by pressing the Power Button .
2. If the camera is in the video recording mode, move the Recording Slide Switch to
S T O P.
3. After the camera power has been turned on, press the Power Button to take a
photo. A short vibration and a flash of the Green LED indicate a still photo has been
recorded.
*The still photo function is disabled during video recording.
*The default photo mode is "single photo." Burst mode gives you a series of 10 photo
shots per second to capture that "can't miss" moment. Time Lapse mode can be utilized
to take a series of photos at 5, 10, 30 or 60-second intervals. To change the mode, please
refer to the section "Changing the camera settings"
*When the memory card becomes full, the camera will vibrate for five seconds and the
Green LED will flash continuously.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaroid XS100 and is the answer not in the manual?

Polaroid XS100 Specifications

General IconGeneral
Supported video modes1080p, 720p, 960p
Maximum video resolution1920 x 1080 pixels
Sensor type-
Effective megapixels (movie)16 MP
Built-in displayNo
Product colorRed, Silver
Waterproof up to10 m
Protection featuresShock resistant, Water resistant
Battery life (max)- h
Weight and Dimensions IconWeight and Dimensions
Weight136 g

Related product manuals