Need help?Do you have a question about the Polk Audio PA D2000.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Total Harmonic Distortion at Rated Power | <1% |
| Frequency Response | 20 Hz - 20 kHz |
| Crossover Slope | 12 dB/octave |
| Bass Boost | 0dB - 18dB |
| Fuse Rating | 30A |
| Input Sensitivity | 200mV - 6V |
| Operating Voltage | 9V - 16V |
| Power at 4 Ohms | 200W x 2 |
| Power at 2 Ohms | 300W x 2 |
| Bridged Power at 4 Ohms | 600W x 1 |
Lists the items included in the Polk Audio amplifier package.
Advises on safe listening volumes to prevent hearing damage.
Explains how to connect terminals for internally bridged hookups.
Details the layout and function of amplifier's end panel controls and connections.
Instructions for connecting power supply wires to the amplifier.
Explains how to bridge channels for higher output power.
Discusses suitable places and considerations for amplifier mounting.
Specific advice for installing the amplifier in the passenger compartment.
Specific advice for installing the amplifier in the trunk.
Provides a sequential guide for installing the amplifier.
Outlines steps to test the amplifier after installation.
Guides on setting amplifier levels and crossovers for optimal sound.
To Next Page
